Services

Hull maintenance

We take care of the underwater part of your boat in the Albufeira Marina boatyard: cleaning, sanding, antifouling, anodes, propellers and shafts — so you go faster, use less fuel and protect the hull.

Nautiworks technician sanding a yacht's hull

The underwater hull is constantly exposed to salt water, weed and barnacles. A dirty or poorly protected hull slows the boat down, increases fuel consumption and can eventually damage the gelcoat and underwater components.

At Nautiworks we look after the underwater hull from start to finish: once the boat is lifted out, we assess the hull, prepare the surface and apply the right products for your boat and the way you use it.

What we do

Washing and scraping

Pressure washing straight after lift-out and removal of weed, barnacles and old antifouling residue.

Sanding and preparation

Sanding the hull and preparing the surface so that new coats bond properly.

Primers and barrier coats

Application of primers and epoxy barrier coats to protect the gelcoat and ensure antifouling adhesion.

Antifouling

Application of antifouling paint suited to the type of boat, its speed and how long it stays in the water.

Osmosis treatment

Detection and treatment of osmosis blisters in the gelcoat, with drying and rebuilding of the layers.

Sacrificial anodes

Checking and replacing hull, shaft, drive and thruster anodes.

Propellers, shafts and rudders

Cleaning, polishing and protecting propellers and shafts, and checking bearings, rudders and trim tabs.

Hull inspection

Checking through-hulls, seacocks, transducers, cracks and damage, with a report on the hull's condition.

When it makes sense

Underwater hull maintenance should be done regularly. It is especially recommended:

  • Once a year
  • Before the season starts
  • Loss of speed
  • Higher fuel consumption
  • Blisters in the gelcoat
  • Before selling the boat

How we work

  1. Get in touch

    Contact us and tell us about your boat and when you would like the work done.

  2. Lift-out and assessment

    We arrange the lift-out, assess the hull and give you a clear quote before starting.

  3. Treatment

    We clean, prepare and apply the products in the Albufeira Marina boatyard, respecting drying times.

  4. Back in the water

    We check all the work and launch the boat, ready to sail.

Time to look after your hull?

Tell us about your boat and when you would like to lift it out — we will get back to you as soon as possible.

Contact us